Click image to view full size image
SD Button Bits
We are engaged in manufacturing supplying and exporting high quality DTH Button Bits. These Button bits have two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
The DTH Button Bits are also called rock busters due its high strength, wear and tear resistance. Our flawless range of DTH Button Bits is appreciated for durability, dimensional accuracy, high performance and corrosion resistance. We are capable of offering a wide range of DTH Button Bits that is well known for its efficiency during drilling, high penetration rate, good flushing and long service life has made our product favorite world wide. Our DTH button bits are manufactured from the optimum quality raw materials using high technology machines.
Shank can be available:
1) Dia. 64mm-70mm shank Bulroc BR1
2) Dia. 70mm-95mm shank Halco MACH20, Bulroc BR2
3) Dia. 90mm-102mm shank COP32, COP34, Halco MACH303, M30, DHD3.5, Bulroc BR3
4) Dia. 105mm-152mm shank COP44, DHD340, Halco MACH44, SD4, M40, QL40, Bulroc BR4
5) Dia. 135mm-165mm shank COP54, DHD350R, COP54, Halco MACH50, SD5, M50, QL50, Bulroc BR5
6) Dia. 152mm-254mm shank COP64, DHD360, SD6, M60, QL60, Bulroc BR6
7) Dia. 203mm-330mm shank COP84, DHD380, SD8, QL80
8) Dia. 254mm-380mm shank SD10, Numa100
9) Dia. 305mm-508mm shank DHD1120, SD12, N120, N125
10) Dia. 405mm-864mm shank SD15, SD18
11) VKP80, VKP95, CIR90, CIR100, CIR110, CIR150, CIR200...
DTH Button Bits:
Features:
Button bit is well known for its high wear resistance on medium-hard to hard abrasive rock formations (between 200 MPa to 260 MPa compressive strength). Featuring spherical tungsten carbide inserts that is known to have strong configuration against carbide fracture.
Recommended for eliminating hole deviation
Widely used drifting and tunneling
Bit face design is ideal for medium-hard to hard abrasive rock
Shank can be available:
R25/R32 button bits: From 41mm to 115mm
T38/R38 button bits: From 57mm to 89mm
T45 button bits: From 70mm to 105mm
T51 button bits: From 89mm to 127mm
ST58 button bits: From 89mm to 127mm
GT60 button bits: From 102mm to 152mm
EL68 button bits: From 115mm to 152mm
ST68 button bits: From 115mm to 152mm
Buttons shape: Domed, spherical, parabolic (semi-ballistic), ballistic
Face shape: Flat face, drop center, uni-face;
Skirt type: Normal, retract, straight retract
ROSCHEN DTH bits Specifications | ||||
Hammer Size |
Bits diameter |
Shank |
ROSCHEN CODE |
|
Metric |
Inch |
|||
1" |
64mm-70mm |
2 1/2"-2 3/4" |
BR1 |
ROS 11 |
2" |
70mm-95mm |
2 3/4"-3 3/4" |
MACH20/BR2 |
ROS 22 |
3" |
90mm-102mm |
3 1/2"-4" |
COP32/COP34/MACH303 |
ROS 32 |
M30/DHD3.5/BR3 |
ROS 34 |
|||
4" |
105mm-152mm |
4 1/8"-6" |
COP44/DHD340/MACH44 |
ROS 42 |
SD4/M40/QL40 |
ROS 44 |
|||
5" |
133mm-165mm |
5 1/4"-6 1/2" |
COP54/DHD350R/MACH50 |
ROS 52 |
SD5/M50/QL50/BR5 |
ROS 54 |
|||
6" |
152mm-254mm |
4 1/8"-10" |
COP64/DHD360/SD6 |
ROS 62 |
M60/QL60/Bulroc BR6 |
ROS 64 |
|||
8" |
203mm-330mm |
8"-13" |
COP84/DHD380/SD8 |
ROS 82 |
QL80/M80 |
ROS 84 |
|||
10" |
254mm-380mm |
10"-15" |
SD10 |
ROS 100 |
NUMA100 | ||||
12" |
305mm-508mm |
12"-20" |
DHD1120/SD12 |
ROS 120 |
NUMA120/NUMA125 | ||||
Notes: Metzke, Remet thread is available! | ||||
Bit face shape selection:
1. Drop Center Bit
For high penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control.
2. Concave Face
The all-round application bit face specifically for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity.
3. Flat Face Bit
This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash.
4. Double Gauge Face
This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.
5. Convex Face
For high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.
We can also provide related products DTH hammers, ODEX system, symmetrix systems, slide block drilling systems, etc and DTH drilling pipes for various thread API REG, API IF, BECO, etc
Quality warranty:
Our products are made of high quality steel and all spares parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion.
Package:
Using ply-wooden cases and pallet for package to protect the products and avoid the damagement during transportation. Also we can customize package according to your special requests.
Production time:
Generally need 10-15 days
Transportation:
By air, By Express or By sea according to your requests.
E-mail: 